User Manual
Screen for video-projection »
SCSP/SCRSP series
WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future
reference. It contains important information about the installation, usage and maintenance of the unit.
The information provided in this manual has been carefully checked. However Music & Lights is not responsible for any possible inaccuracy.
Design and specifications are subject to change without notice.
For further information, please contact our Service Center: tel. +39 0771 72190 fax +39 0771 721955 - [email protected]
Rev002 - 04/10 ©2010 Music & Lights S.r.l. - Italy - www.musiclights.it
GB
General Instructions
• The products referred to in this manual conform to the European Community Directives and are therefore marked with . • Do not dismantle or modify the fixture. • All
work must always be carried out by qualified technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly. • If the unit is to be
put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• You are recommended to install the screen carefully, checking that the fixing surface is resistant and solid enough to support the weight of the screen, so as to prevent the
risk of it falling that could put the safety of persons. • Use suitable insert and screw (not provided): they must be chosen according the type of wall.
CODE
Format
Projection
L2 x H2
View Area
D (inches)
L1
L2
L3
H1
H2
D1
Ø
kg
SCSP87
1:1
Front
155 x 160
155 x 160
87
172,8
155
161,5
8,5
160
7,3
2,8
6
SCSP114
1:1
Front
200 x 210
200 x 210
114
217,8
200
206,5
8,5
210
7,3
2,8
8
SCSP123
1:1
Front
240 x 200
240 x 200
123
257,8
240
246,5
8,5
200
7,3
2,8
10
SCSP137
1:1
Front
280 x 210
280 x 210
137
297,8
280
286,5
8,5
210
7,3
2,8
12
SCRSP87
1:1
Rear
155 x 160
155 x 160
87
172,8
155
161,5
8,5
160
7,3
2,8
6
SCRSP114
1:1
Rear
200 x 210
200 x 210
114
217,8
200
206,5
8,5
210
7,3
2,8
8
SCRSP123
1:1
Rear
240 x 200
240 x 200
123
257,8
240
246,5
8,5
200
7,3
2,8
10
SCRSP137
1:1
Rear
280 x 210
280 x 210
137
297,8
280
286,5
8,5
210
7,3
2,8
12
Fig. 1
Fig. 2
Fig. 3
Installation
Follow the instruction below for installation of the screen (figure 1 e 2):
1.
Hang it on a wall or from the ceiling, making sure it is perfectly horizontal and
in line with the projector’s focal plane.
2.
Open the screen by pulling downwards.
3. After the writing “STOP” appears, continue for around 10 cm.
4.
Now release the screen accompanying it gently.
5.
After around 10 cm it will automatically lock, remaining open.
6.
This screen can be locked every 13 cm, always by pulling it downwards and
then by letting it return slowly.
7.
To close the screen, pull it downwards once again by around 10 cm and then
release it accompanying it as it returns. This movement must be faster than
the one used to lock the screen.
8.
ATTENTION: Never open the screen by more than 20 centimetres after the
writing “STOP”.
9.
If you do go beyond the writing “STOP” by more than 20 centimetres and the
screen jams, take hold of it with two hands, jerk it downwards sharply and
towards yourself and let go immediately. If the screen is still jammed after this
operation, contact your stockist.
NEVER REMOVE THE BLACK FRAME PLUG TO MAKE REPAIRS AS THIS INVALIDATES
THE GUARANTEE!
Description and Technical specifications (fig.3)
Spring rolling-up screen suitable.
• M1 certified PVC cloth, fire-retardant and with an high reflectance factor.
• Easy wall or ceiling mount by means of four dowels.
• Anodized aluminium case.
• Cloth adjustable by length with stops every 13 cm.
• Also available in a version with the cloth surface suitable for the rear-projec
-
tion.
Cleaning the unit and maintenance
• All screws used for installing the device and any of its parts should be tightly
fastened and should not be corroded.
• For cleaning only use a soft cloth, dry or slightly damp; never use chemicals or
aggressive detergents.
