6
Assembly Instructions
Note:
It is strongly recommended that two or more people assemble this model.
Step 1
Find an appropriate location and drill holes in the wall and ground as the diagram shows. Firstly, place
Short base frame
（
#4
）
and Long base frame
（
#3
）
on the wall and ground, the fixed plate spacing
between the two parts should be 11mm, then use a pen to mark the position of the six holes, remove
Short base frame
（
#4
）
and Long base frame (#3), drill six
Ø
14 holes with depth of no less than 60mm.
WARNING: Expansion bolts
must be installed into
concrete walls or brick walls.
Wall
Wall
Ground
60
Summary of Contents for Wall Mounted Folding Squat Rack
Page 21: ...21 Folding Diagram...
Page 26: ...26 Exploded Diagram...
