![Murska 1000HD Manual Download Page 38](http://html1.mh-extra.com/html/murska/1000hd/1000hd_manual_1858496038.webp)
38
10.
Now the bagger screw will start pushing crimped and acidified grain into the tube.
Note! The bagger screw will grind the crimped grain for a second time so the roller
clearance can be kept bigger than normally.
11.
When the end of the bag is starting to be full and the bag starts stretching, release the
brake valve carefully (to around 70–100 bar) so that the machine will start slowly moving
forward. Select the suitable brake pressure and speed of travel by monitoring the
stretching of the bag. The bag must stretch approximately 5–10% to make the bagging
sufficiently tight.
The weight of the machine, evenness of the surface, etc. have an effect on the tightness of
the bagging but usually there is no need to adjust the brake during bagging if the
appropriate speed is found at the beginning.
Check the stretch of the bag regularly (e.g. every metre).
For example: Ø1.5m of bag will hold c. 1.7 tonnes of grain per meter. If the crimping
rate is 30 tonnes/hour, the bagger must move c. 30/1.7m/h = 17m/h = 30cm/min.
12.
If you need to stop bagging/crimping for some reason, you can just stop the crimper.
There is no need to adjust the brakes. When you continue bagging, you will have a
uniform and even tube without any loose or stretched bits.
Summary of Contents for 1000HD
