Murray 7800201, Instruction Book, Page: 8 / 48

www.murray.com 6
Assembling the Grass Bag (Not All Models)
Note: On some models, the side mounted discharge deflector
is temporarily attached (for shipping purposes) to the rear of
the mower. Before assembly of the grass bag, remove the
side mounted discharge deflector.
1. Slide the frame assembly (A, Figure 7) into the ends of
the support tube (B). Make sure the frame assembly is
fully inserted into the support tube.
2. Make sure the handle (A, Figure 8) is on the outside of
the grass bag.
3. First, attach the clips (B, Figure 8) to the side of the
frame assembly (C). Next, attach the clips to the top and
bottom of the frame assembly.
4. Close the elastic top cover (A, Figure 9). When
operating the mower with the grass bag, the elastic top
cover must be in the closed operating position.
Preparation
B
Figure 7: Installing the frame assembly
A
B
Figure 8: Installing the bag clips
A
Figure 9: Closing the elastic top cover
A
C
Preparation (Continued)
Not
for
Reproduction