00-02-0839 -
4
-
2012-09-21
Main Menu
This section describes the items listed in the
Main Menu
. All interface with
the PV25 is through the
Up/Down Arrows
. When power is applied to the
unit, the Murphy logo displays first, and then the Parameter list begins to
display. The default display at start up is always the Parameter List.
Press both arrows simultaneously and then release to reach the
Main
Menu
. Use the
Up
and
Down
Arrows (buttons)
to scroll through the items.
The
Main
Menu
consists of
Show 1-up, Active Faults, Stored Faults, Set
Units, Set 1-up, Scroll ON/OFF, Machine Hours ON/OFF, Tier 4 ON/OFF,
Set Tier 4
, and
Backlight
. To
return
to the
Parameter
list, scroll to
Show 1-
up
and momentarily press both arrows, release and parameter readings
begin to display.
Menu
Item
Options Action
Show 1-
up
Switch to the parameter display.
Momentarily hold the
Up
& Down
arrows, when
released, broadcast
parameters begin to
display.
Active
Faults
The Active Fault (Active FLTS)
menu shows the
SPN
(Suspect
Parameter Number),
FMI
(Failure
Mode Identifier), and
OC
(Occurrence Count) for faults
currently broadcasting on the
CANBus.
When a new fault message is
received, the PV25 automatically
switches to
Active Faults
.
The
Amber
(left) or
Red
(right) LED lights to
indicate the status of the
fault – Warning or
Shutdown.
If there is more than one
fault, the PV25
automatically scrolls
through each fault.
To return to the
Main
Menu
press the
Up &
Down
arrows
simultaneously and
release.
1-800-548-1191 - http://www.partdeal.com - [email protected]
