Low Fuel Level Setpoint
The next screen displayed is the
LOW FUEL SETPOINT
screen. The default setting is 10%. This
setting enables the PV101 to generate a DTC (Diagnostic Trouble Code) displaying low fuel level.
Adjusting Low Fuel Level Setting
To change the Low Fuel Level setpoint, use the left and right arrows to increase or decrease the set point. Select
[MENU]
to cancel or
[ENTER]
to confirm the setpoint.
NOTE:
To change the setpoint from backlight dimmer input to fuel level input the
[ENTER/OK]
selection must be made.
Using a Non-Murphy Fuel Sender
The next screen displayed is the
FUEL SENDER SETUP
screen. The
FUEL SETPOINTS ON
must be shown to
work with a non-Murphy fuel sender. With the
FUEL SETPOINTS ON
displayed, the unit can be set to use a non-
Murphy Fuel Sender.
NOTE:
The Murphy Standard setpoints must be cleared before continuing.
(5)
Summary of Contents for PowerView PV-101
Page 11: ......
