Preset button
DAB / FM button
Sleep button
1 Plug the power cable into the DC 5V socket on the
back of your Radio.
2 Plug the other end of the cable into a standard
three pin wall socket and switch on the power at
the wall.
3 Your radio will show a brief welcome message,
and then will automatically tune into all the
available DAB stations.
4 Once complete the display will advise you of the
number of DAB stations found. If there are no
DAB stations available in your area the display
will show “Service N/A”. All available stations will
be saved for future use.
5 You can toggle between DAB and FM by pressing
the
DAB/FM
button.
4
3
Note:
Aerial positioning
You may need to reposition the aerial for optimum
reception. The best position is dependent on the
station and the strength of the signal.
There is a signal bar icon
in the top right corner
of the radio display. Use this as a reference to find
the best signal.
Note:
Scanning for station
If wish to find new DAB station or you move the
radio to a new location, you can search using the
SCAN
button.
Your DAB
/
FM Clock Radio
01
Setup
02
Setting up your radio
Scan button
Volume up button
Display button
Volume down button
LCD
Select button
Previous button
Next button
ON / OFF button
Alarm button
Snooze / Mute button
Power Input
Headphone jack
(DC 5V)
Antenna
For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm
For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm
