I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
DRINKING FOUNTAIN
A172-SO
Page 5 of 10
Revised:
12/20/17
7020-961-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
CLEANING & MAINTENANCE GUIDE:
CARTRIDGE REPLACEMENT/ STRAINER MAINTENANCE
Note: Use the universal maintenance tool to perform the following:
1. Strainer plug must be removed before cartridge replacement and strainer
maintenance (no need to turn the water off at the angle stop). Some residual water will drain
during plug removal.
2. Clean strainer as needed using clean water.
3. Cartridge replacement - insert diamond end of the universal tool into push button, rotate 90 degrees and pull firmly to
remove the button. Remove cartridge retaining nut . Remove and replace cartridge. When replacing cartridge be sure to
align the inlet and outlet ports on the cartridge with the ports in the valve body.
—
NOTE: STRAINER SCREEN MUST BE IN PLACE FOR WATER TO FLOW.
1. Periodically remove fountain top and clean out in-line strainer.
2. DO NOT use harsh chemicals, abrasive or petroleum based cleaners. Use of these will void the Murdock warranty.
3. Exterior panels can be cleaned using mild household detergents or warm, soapy water. Extra care must be used cleaning
chrome plated items and mirror finished stainless steel. They can scratch easily and should only be cleaned using a clean,
soft cloth and mild soap with water or a mild glass cleaner.
For Stainless steel units:
1. To Remove water spots or rust spots, stainless steel cleaner/polish on a cloth is recommended.
2. If there are stubborn spots or if you wish to treat a scratch, synthetic abrasive general purpose pads such as scotch brite
are recommended.
3. Apply stainless steel cleaner/ polish to the synthetic abrasive pads and carefully rub the panel with the grain.
4. DO NOT use harsh chemicals, abrasive or petroleum based cleaners. Use of these will void the Murdock warranty. DO
NOT use abrasives on powder coated units.
5. Stainless steel should be kept clean at all times. If a coating of stainless steel cleaner/polish is maintained, stainless steel
surfaces will retain their new, clean, polished appearance indefinitely.
ITEM
PART NUMBER
DESCRIPTION
1
7003-095-001
VALVE ASSEMBLY
2
7000-060-000
FLOW REGULATOR CARTRIDGE (0.5 GPM)
3
7003-097-001
O-RING & STRAINER PLUG
4
7003-864-000
STRAINER FILTER SCREEN
5
7003-830-000
UNIVERSAL MAINTENANCE TOOL
2
4
3
1
5
