Muratec MFX-2590 Quick Manual Download Page 102

Page: 102 / 317

1
2

Basic F

ax Functions

Basic Faxing 3-17

Press <Start>.

If you loaded the document in the ADF, this concludes the procedure.

If you loaded the document on the document glass, load the next document, and

press [Next Doc].

Press [Tx Start] to start transmission.

Repeat step 5 to scan all the documents.

To finish scanning, press [Tx Start].

Note

For details on canceling transmission, refer to “

•

Canceling / Checking Faxes

”.

(See

page 3-26.)

Transmissions can be reserved while the machine is communicating. The reserved

•

transmission will start when the current job is completed. Up to 100 transmissions

can be reserved.

Manual Transmission

Use this method when the other fax machine uses manual reception, or when you want to

transmit after having a telephone conversation.

Note

The optional handset is required when picking up the handset to transmit.

•

Manual transmission cannot be performed from the document glass.

•

Load the document in the ADF, and press <Fax>.

For details on loading documents, refer to Chapter 1, “Loading Documents” in the User’s

•

Guide.
Set the resolution and contrast as necessary.

•

(See page 3-21.)

Press the [Address Book] tab or the [Num. keys] tab.

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands

Muratec MFX-2590, Quick Manual

Search results

Summary of Contents for MFX-2590

Reviews:

Related manuals for MFX-2590

Brands by name

Popular brands