Muratec MFX-2590 Quick Manual Download Page 101

Page: 101 / 317

3-16 Basic Faxing

Basic Faxing

Transmitting Faxes

This section describes the often-used basic procedure for transmitting faxes.

Load the document, and press <Fax>.

For details on loading documents, refer to Chapter 1, “Loading Documents” in the User’s

•

Guide.
Set the resolution and contrast as necessary.

•

(See page 3-21.)

Press the [Num. keys] tab.

Enter the number of the destination.

Dialing options can be inserted.

•

(See page 3-24.)

Destinations can also be selected from the address book.

•

For details on specifying other destinations, refer to “

•

Specifying Destinations

”.

(See page 5-2.)

Summary of Contents for MFX-2590






























































































































































































































































































































Search results

Summary of Contents for MFX-2590

Reviews:

Muratec MFX-2590, Quick Manual, Page: 101 / 317

Search results

Summary of Contents for MFX-2590

Reviews: