Muratec MFX-2550 Guide, User Manual

Page: 106 / 327

1
2
3
Basic F
ax Functions
Basic Faxing 3-21
Redialing
“Redialing” refers to the process of transmitting to a previous destination again. The
machine supports the following two types of redialing:
Manual redialing •
Automatic redialing •
Note
You cannot use manual redialing or automatic redialing when performing manual
transmission.
Manual Redialing
„
The machine memorizes the latest 10 destinations transmitted to using the numeric
keys. You can recall the memorized numbers to transmit a fax again. For details on the
procedure, refer to “ Selecting From the Dial History (Redial) ”. (See page 5-15.)
Automatic Redialing
„
When transmission was not successful during automatic transmission because the line
was busy, the number is automatically redialed at regular interval.
If the transmission was not successful even after the set number of redials, the document
stored in the memory will be deleted and the error message will be printed.
Note
Redialing cannot be performed with real time transmission. •
The automatic redialing frequency and interval can be set from 0 to 14 times and •
0 to 5 minutes, respectively. For details on changing the settings, refer to “ List of
Other Default Settings ”. (See page 7-49.)
For details on canceling a transmission waiting for redialing, refer to “ • Canceling /
Checking Reserved Documents ”. (See page 3-31.)