2-8
Using the OfficeBridge
Searching for a destination
NOTE:
In order to search an LDAP server, the server must be registered in
advance. Contact your system administrator. For more information on
server set up, see
1
When the “Address Book” screen appears, click [Search].
2
Enter the search information.
Item
A Select the server that contains the destination. Usually, you do not
need to change the server. If you are not sure about it, ask your system
administrator.
B • Name
Enter the name or part of a name to be searched.
• Fax
Enter the fax number or a part of a fax number to be searched.
Enter part of the e-mail address to be searched.
• Department
This is not an independent field. To use this field either the Name,
Fax or e-mail should also be entered.
C • Any
Searches any information in this field, including “blanks”.
• Initial
Searches for contacts that begin with the characters entered in this
field.
• Final
Searches for contacts that end with the characters entered in this field.
• Equal
Searches for contacts that match exactly with the information
entered in this field.
• Not Use
Information in this field (including blanks) will not be used for
searching
D • AND
Searches for contacts that meet all the entered criteria.
• OR
Searches for contacts that meet any of the entered criteria.
C
A
D
B