MBN52832DK User Guide
Page 14 of 18
3.
Use buttons SW1 and SW2 to choose between LED1 and LED2.
4.
Hold a NFC enabled smart phone close to the NFC antenna to read the URL stored in the module.
5.
Grant the request when the phone prompts for permission to open the URL. The smart phone
browser should then display a web page to the Nordic DK similar to the one shown below.
Figure 10 Sample nRF52 DK webpage
Figure 11 nRFgo Studio
The
nRFgo Studio
tool can be used to erase this preloaded application and program the MBN52832DK
with another hex binary image. Install the nRFgo Studio on a PC and use the following step to update the
firmware:
