Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2018
Type 1SC EVK User Guide, v1.3, 5/4/2020
Page
18
of
44
www.murata.com
Figure 14 PuTTY configuration for CLI port
After connecting to the CLI port, check the prompt. I
f the prompt is “#”, that means the
firmware is in u-
boot mode. Enter “boot” command to boot it up; after boot up, the prompt
should change to “>”. This is illustrated below.
Figure 15 Prompt for CLI Port
7.4.1
CLI commands
All supported CLI commands can be seen with the “help” command. The “help” command lists
categories of CLI commands.
Use “help <category>” to see commands under a particular category.
