4
CHAPTER
TWO
OVERVIEW
This tutorial contains instructions for the following getting started steps:
1.
Required preparation materials.
2.
Connecting your board to a host machine.
3.
Installing software on the host machine for developing and debugging embedded applications.
4.
Cross-compiling a FreeRTOS demo application to a binary image.
5.
Loading the application binary image to your board and then running the application.
6.
Interacting with the application running on your board across a serial connection for monitoring and debug-
ging purposes.
2.1 System Diagram
The typical system diagram shown as below:
Fig. 2.1: System Diagram