Munters MCS300, User Manual

Page: 12 / 28

MCS300
Open airflow system
The dehumidifier is placed outside the area to be dehumidified. Dry air is transported with ducting to the
space to be dehumidified and the wet air is discharged in the vicinity of the unit or moved outdoors, see
Figure 3.3 .
The installation is used to solve the following problems:
- When moisture damaged objects are to be dehumidified.
- Dust or corrosion causing particles are present in a space where dry air will be supplied.
- To prevent moisture from entering the dehumidified space/ object.
0 1
A
B
G
E
F
D
C
Figure 3.3 Installation in an open airflow system
A. Dry air E. Wet air
B. Process air F. Reactivation air
C. Connection fitting
1)
G. Connection fitting
2)
D. Surplus air
1)
Fitting with diameter 80 mm (for example, Lindab Safe NPU nipple or alternate Lindab Damper DRU80).
2)
Fitting with diameter 125 mm (for example, Lindab Safe NPU nipple).
3.9 Electrical connections
3.9.1 General
Included with delivery is a 3.5 m long power cable with a plug for connection to an earthed outlet. The
voltage and frequency are specified on the unit’s identification plate.
3.9.2 Safety
W W
WARNING!
ARNING!
ARNING!
The unit must be connected to an earthed electrical outlet.
W W
WARNING!
ARNING!
ARNING!
The unit must not be connected to other mains than specified on the unit’s identification plate
9
Installation
190TEN-1027- F1404