5.2 Install the main body
Fig.5-5
Hang the indoor unit on the hook.
(Refer to Fig.5-6)
(The bottom of body can touch with floor or suspended,
but the body must install vertically.)
For wall installations, secure hook using 6 screws and the
indoor unit using 4 screws
Fix the hook with tapping screw onto the walll which can
support the weight of the indoor unit.
(Refer to Fig.5-5
˅
Fig.5-6
Fig.5-8
Fig.5-4
195mm
Hook
Tapping
screw
Washer
˘
mm
9.1 Main board Code designation
Removing front grille
1) Open the front panel.
2) Remove the 4 screws and remove the front grille while
pulling it forward (3 tabs).
Attach the front panel and front grille in their original positions
once all connections are complete.
For floor installations, secure the indoor unit using 6 screws.
( Do not forget to secure to the rear wall.)
(Refer to Fig.5-8)
●
Fig.5-7
●
Using 4 screws to secrew the indoor unit.
(Refer to
Fig.5-7)
●
Installation manual
Cassette 4 way compact
5
