2. Short press the button to switch calibration units, then short
press the “MODE” button to confirm.
3. Short press the button to set the tens place, such as 12kg, 22kg,
etc.
4. Short press the PCS button to set the ones place, such as 3kg,
4kg, 5kg, etc. The setting method for English units is similar.
5. After setting the calibration weight, press the “MODE” button
to confirm the display of “CAL” and then the flashing calibration
weight will be displayed.
6. Load the weight. After the weight stabilizes, the actual weight
will be displayed after “PASS” is displayed.
Tutorial Video: https://munbyn.biz/01c
Tutorial Video: https://munbyn.biz/01st
3.7 Custom shutdown time
When powered by battery, you can customize the shutdown time
per the following steps:
3.8 Error messages
Overload:
Low battery :
1. In the zero state, long-press the button to enter the shutdown
time selection.
2. Press button to switch between "1" (minutes) , "3" (Minutes),
"5" (minutes) and “-”(No shutdown).
3. press the MODE button to confirm.
Note:
When using the DC power supply, the scale does not
automatically shut down.
06
07
Summary of Contents for IPS01
Page 1: ...Postal Scale User Manual ...
