Features
Power button: Turns the display on and off. Press and hold to reset the
device, power off or swap battery.
Speaker: Provides audio out-put for video and music playback.
Touch screen: Displays all information needed to operate
Battery connector: Pull up to remove the battery
Notification
LED:Indicates system status while application generated notifica-
tions(programmable).
Charging LED: Indicates battery charging status while charging.
Camera: Takes photos and videos.
Camera Flash: Provides illumination for the camera.
Volume Button: Increase and decrease audio volume.
Scan Button: Be triggered to active the scanner
User-defined Button: The key value can be programmed by user.
Forced restart: Press and hold the 'Power button' at least 8 seconds .
BATTERY INSTALLATION
Unlocked Position
Locked Position
Note: Gently rotate the knob
in quarter-turn motion.
Do not apply excessive force.
Insert battery in the direction as shown in the picture on the right .
Sit the battery tightly in the corresponding position.
MICRO SIM/MICRO SD CARD INSTALLATION
Only use a micro SIM card
1.Swing the knob by 90 degrees to open
the battery cover, then remove the battery.
2. Slide the Micro-SIM Card into the
corresponding slots with contacts facing
down.
3. Push and pull the card to remove.
Note:
Overexertion should be avoid when
installing or removing the card.
5
●
●
Summary of Contents for IPDA053
Page 1: ...IPDA053 QUICK START GUIDE...
