MUNBYN IMP013, User Manual

Page: 11 / 32

3.2 Battery Charging
For charging method
After the printer is used for a period of time, the battery will
run out. When the printer battery is about to run out, all BATT
indicators(Bluetooth) will go out, while the ERROR indica-
tor(red) will be on.
At this time, the user should charge the printer.
If the printer is automatically turned off during printing, it must
be charged before reuse.
If you use a power adapter not provided or approved
by us, the printer may be damaged.
You can print while charging.
The equipment supports fast charge function and can
continue to print after short-time charging.
Do not remove the battery while charging.
The battery cannot be charged with the adapter and
USB cable at the same time.
Insert the mains plug of the charger into a 220V,50HZ power outlet, then insert the charging plug into the printer's
charging outlet, and the printer will start charging. During the charging process, if the printer is turned on, the BATT
indicator(blue) will flash in turn from left to right until the battery is fully charged and the BATT indicator is always on.