Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 144 / 208

2. Check the de ection of the fertiliser side chain (1) and the seed side chain (2) by pressing
the chain down and lifting it up with your nger.
The maximum allowed de ection (A) is 10 mm. If needed, tighten the chains in
accordance with section 7.5.2. Tightening the chains in a machine with a gearbox
on the seed side.
3. Put the transmission cover back in place.
7.1.5.3. Checking the tightness of chains in a machine with a dual gearbox
1. Raise the transmission cover.
Figure. 7.1.5.3. - 183. Checking the tightness of the transmission chains in a machine with a dual gearbox
2. Check the de ection of the transmission chain (2), fertiliser side chain (3) and the seed
side chain (1) by pressing the chain down and lifting it up with your nger.
The maximum allowed de ection (A) is 10 mm. If needed, tighten the chains in
accordance with section 7.5.3. Tightening the chains in a machine with a dual
gearbox.
3. Put the transmission cover back in place.
7.1.5.4. Checking the tightness of the chains in the small seed hopper
transmission
1. Raise the transmission cover.
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
144 (208)