Multiva FX300 Comfort, Operation And Maintenance Manual

Page: 66 / 189

The machine is level when the sidebar (1) of the machine is horizontal.
Connect the seed drill to the tractor in accordance with section 5.3. Connecting to
tractor.
1. Lower the machine by using the tractor hydraulics.
2. Switch off power in the tractor, remove the key from the ignition and engage the parking
brake.
Figure. 5.3.3. - 67. Adjustment with a turnbuckle
3. Release the locking by turning the plate (1) upward.
4. Turn the turnbuckle (2) by the handle (1) and check visually that the machine is straight.
5. When the machine is straight, turn the plate downward to engage the lock.
5.3.4. Adjusting the lengthwise level of the machine with a drawbar
cylinder
Connect the seed drill to the tractor before adjusting the lengthwise level in
accordance with section 5.3. Connecting to tractor. The tractor should be on during the
adjustment. Perform the adjustment when the machine is on a level surface.
Figure. 5.3.4. - 68. Lengthwise level
The machine is level when the sidebar (1) of the machine is horizontal.
Operation and maintenance manual
FX300 and FX400 Comfort
1.00
66 (189)