Multiva FX300 Comfort, Operation And Maintenance Manual

Page: 155 / 189

7.5. Tightening the transmission chains
7.5.1. Tightening the chains in a machine without a gearbox
1. Raise the transmission cover.
Figure. 7.5.1. - 206. Tightening the chains in a machine without a gearbox
2. Loosen the fertiliser side chain (1) by loosening the nut of the chain gear (3).
3. Loosen the seed side chain (4) by loosening the tensioning wheel (2).
4. Tighten the seed side chain by pushing the tensioning wheel to the right.
5. Tighten the tensioning wheel.
6. Tighten the fertiliser side chain by pushing the chain gear (3) down.
7. Tighten the chain gear nut (3).
8. Check the chains for de ection.
The de ection should be less than 10 mm.
9. Put the transmission cover back in place.
7.5.2. Tightening the chains in a machine with a gearbox on the seed
side
1. Raise the transmission cover.
Figure. 7.5.2. - 207. Tightening the chains in a machine with a gearbox on the seed side
2. Loosen the fertiliser side chain (1) by loosening the nut of the chain gear (4).
Operation and maintenance manual
1.00 FX300 and FX400 Comfort
155 (189)