2974
Figure. 7.1.5.3. - 122. Checking the tightness of the chains in the small seed hopper transmission
2. Check the de ection of the chains (1-3) by pressing the chain down and lifting it up with
your nger.
The maximum allowed de ection (A) is 10 mm. If needed, tighten the chains in
accordance with section 7.5.3. TIGHTENING THE TRANSMISSION CHAINS OF THE
3. Put the transmission cover back in place.
7.1.6. Checking the tightness of the wheel drive chain
Figure. 7.1.6. - 123. Cover of the wheel drive housing
1. Open and remove the fastening bolts (1,3) of the wheel drive housing and the housing
cover (2).
Operation and maintenance
manual
Cerex 300
1.00
107 (156)
Summary of Contents for Cerex 300 SeedPilot
Page 159: ...Hydraulic schematic Appen dix 2 Cerex 300 1 Appendix 2 Hydraulic schematic...
Page 160: ...Hydraulic schematic Appen dix 2 Cerex 300 2...
Page 161: ...Electrical Diagram Annex 3 Cerex 300 1 Annex 3 Electrical Diagram...
Page 162: ...Electrical Diagram Annex 3 Cerex 300 2...
