Multiva Cerex 300 Comfort, Operation And Maintenance Manual

Page: 145 / 187

7.3.5. Cleaning the feeder units
Wear protective goggles and protective gloves when cleaning the feeder.
Clean the feeder units at the end of the seeding season.
Figure. 7.3.5. - 193. Feeder roller
1. If there is seed or fertiliser residue left in the feeder roller (1), adjust the roller width in
accordance with section 6.6.5. Adjusting the width of the feeder roller.
2. If there is still seed or fertiliser residue left in the feeder roller after the adjustment, clean
the roller grooves with a wooden stick.
7.3.6. Cleaning the small seed hopper feeder units
Wear protective goggles and protective gloves when cleaning the feeder .
Clean the feeder units at the end of the seeding season.
Figure. 7.3.6. - 194. Feeder roller
1. If there is seed or fertiliser residue left in the feeder roller (1), adjust the roller length from
side to side in accordance with section .
2. If there is still seed residue left in the feeder roller after the adjustment, clean the roller
grooves with a wooden stick.
Operation and maintenance manual
1.00 Cerex 300 and Cerex 400 Comfort
145 (187)