Multiva Cerex 300 Comfort, Operation And Maintenance Manual

Page: 82 / 187

6.6.5. Adjusting the width of the feeder roller
Figure. 6.6.5. - 96. Adjusting the width of the feeder roller
1. Adjust the width of the feeder roller to the settings provided in the seeding table by using
the screw-type control wheels on the right-hand side of the hopper.
The seeding tables are provided in section 6.5. Seeding quantities.
The control wheel (1) is for seeds and control wheel (2) is for fertiliser. If the
machine is equipped with adjusting of fertiliser target rate, there is no fertiliser
control wheel.
The seed quantity increases when the seed control wheel is turned clockwise. The
fertiliser quantity increases when the fertiliser control wheel is turned clockwise.
The main scale of seeding quantity is on the control wheel lock (3) and the
secondary scale is on the control wheel rim (4).
Operation and maintenance manual
Cerex 300 and Cerex 400 Comfort
1.00
82 (187)