Multitek MB-43 User Manual Download Page 6

  6 

 
 
  
 
 
 
 
   

Note: When needed, please use the 75 ohm terminal jumper to terminate the intercom connection. 

 

How to Use the Product 

1.

 

Answering calls from outside door or other calls: 

When there is a call from the Door Panel the video door phone rings and the display of the camera 

seen on the monitor. For talking, press (       ) and Answer the Call. The conversation limit is 1 minute. 

Press the Key (      ) button to unlock the door.  

2. Calls from Internal Door: 

The video door phone rings when the internal ring button is pressed. There is someone on the door. 

3. Monitoring the Door Entrance: 

 Press the  (        )  button once. Monitor will be off after 1 minute. 

4. Calling the Door Entrance:  

 Press the (        ) button once. You will be connected to the door entrance with the display of it. 

5. Calling the DoorKeeper: 

To talk with the janitor Press (      ) button. It will ring the janitor, if answered, the communication 

starts.

 

6. Calling the Guard: 

Press the (    ) button. It will ring the guard, if answered, the communication starts. 

7.

 

Multi Door Video Camera Selection: 

 Press the (      ) 

Calling the Door Entrance

 button consecutively in 1 second. For example, if you 

press 2 times, you will select the 2. door entrance. You can select 4 different door cameras at most. 

Summary of Contents for MB-43









Reviews: