
REGULATORY INFORMATION
24
SocketModem
®
Cell MTSMC-LSP3 Device Guide
FCC Rule Parts
Frequency Range
(MHz)
Output Watts
Frequency
Tolerance
Emission Designators
22H
825.5 - 847.5
0.218
2.5 PM
2M69G
22H
825.5 - 847.5
0.168
2.5 PM
2M69W
22H
826.5 - 846.5
0.217
2.5 PM
4M49G
22H
826.5 - 846.5
0.167
2.5 PM
4M49W
22H
829.0 - 844.0
0.224
2.5 PM
8M94G
22H
829.0 - 844.0
0.187
2.5 PM
4M93W
27
699.7 - 715.3
0.186
2.5 PM
1M08G
27
699.7 - 715.3
0.155
2.5 PM
1M09W
27
700.5 - 714.5
0.186
2.5 PM
2M69G
27
700.5 - 714.5
0.151
2.5 PM
2M69W
27
701.5 - 713.5
0.182
2.5 PM
4M48G
27
701.5 - 713.5
0.146
2.5 PM
4M48W
27
704.0 - 711.0
0.193
2.5 PM
8M96G
27
704.0 - 711.0
0.176
2.5 PM
4M95W
24E
1850.7 - 1914.3
0.242
2.5 PM
1M08G
24E
1850.7 - 1914.3
0.193
2.5 PM
1M08W
24E
1851.5 - 1913.5
0.244
2.5 PM
2M69G
24E
1851.5 - 1913.5
0.204
2.5 PM
2M69W
24E
1852.5 - 1912.5
0.244
2.5 PM
4M48G
24E
1852.5 - 1912.5
0.192
2.5 PM
4M48W
Ouput power is conducted. Single Modular Approval. This device is approved for mobile and fixed use with respect
to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm
from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter
operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this
transmitter must include operating instructions and antenna installation instructions, for end-users and installers
to satisfy RF exposure compliance requirements. Multi-transmitter, supporting simultaneous transmission
configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h)
and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final
product configurations is the responsibility of the Grantee. Installation of this device into specific final products
may require the submission of a Class II permissive change application containing data pertinent to RF Exposure,
emissions and host/module authentication, or new application if appropriate.