4 Troubleshooting
19
MultiModemZPX User Guide
If you must dial
9
to get an outside line, the easiest way to dial it automatically
using legacy software is to include it in the modem’s dial prefix, e.g.,
ATDT9,
.
Note the comma, which inserts a pause before the number is dialed. By inserting
9,
into the dial prefix, you do not have to include it in each directory entry.
To change the dial prefix in Windows HyperTerminal, select
Connect
from the
Call
menu, click
Dialing Properties
, and type
9
in the local and long distance
boxes.
• If the modem reports
NO ANSWER
, the other system has failed to go off-hook, or
you might have dialed a wrong number. Check the number.
• If the modem reports
NO CARRIER
, the phone was answered at the other end,
but no connection was made. You might have dialed a wrong number, and a per-
son answered instead of a computer, or you might have dialed the correct
number but the other computer or software was turned off or faulty. Check the
number and try again, or try calling another system to make sure your modem is
working. Also, try calling the number on your telephone. If you hear harsh
sounds, then there is a modem at the other end. In that case, the modems might
be having problems negotiating because of incompatibilities or line noise. Try the
call again, connecting at a lower speed by setting register S37 to a lower rate (for
example, by typing
ATS37=11
in the terminal window and pressing E
NTER
).
• Poor line conditions can also affect the connection. When using V.34 or V.32 cli-
ent-to-client connections in poor conditions, setting
S38=0
may result in better
performance.
The Modem Disconnects While Online
• If you have Call Waiting on the same phone line as your modem, it can interrupt
your connection when someone tries to call you. If you have Call Waiting, dis-
able it before each call. In most telephone areas in North America, you can
disable Call Waiting by preceding the telephone number with
*70
(but first check
with your local telephone company).
You can automatically disable Call Waiting by including the disabling code in
the modem’s dial prefix (e.g.,
ATDT*70,
—note the comma, which inserts a pause
before the number is dialed). For example, in Windows select
Start | Settings |
Control Panel
, and then
Modems
. In the
Modems Properties
dialog box, select
Multi-Tech MT5634ZPX-PCI
, and then click
Dialing Properties
. Check
This lo-
cation has call waiting
, and then select the correct code for your phone service.
• If you have extension phones on the same line as your modem, you or someone
else can interrupt the connection by picking up another phone. If this is a fre-
quent problem, disconnect the extension phones before using the modem, or
install another phone line especially for the modem.
• Check that the phone cord between the modem’s LINE jack and the wall jack is
undamaged and firmly connected to both.
• You might have had a poor connection because of line conditions or the problem
might have originated on the other end of the line. Try again.
• Your ISP might have hung up on you because of lack of activity on your part or
because you exceeded your time limit for the day. Try again.
