B Technical Specifications
87
MultiModemZBA-V-V92 User Guide
conversion; U.S. Caller ID reporting; quick-connect startup;
Modem on Hold (only when connected to a V.92 server).
Command Buffer
40 characters
Lightning Protection
FCC Part 68 A/B surge
Transmit Level
-11 dBm (North America)—varies by country setting
Frequency Stability
±0.01%
Receiver Sensitivity
-43 dBm under worst-case conditions
AGC Dynamic Range 43 dB
Interface
TIA/EIA RS-232C/ITU-T V.24/V.28
Connectors
DB25F RS-232C connector; RJ-11 telephone jack, power
jack
Cables
Country-specific telephone and power cables
Note: Any cables connected to the computer should be
shielded to reduce interference.
Diagnostics
Power-on self test, local analog loop, local digital loop,
remote digital loop.
Indicators
LEDs for Transmit Data, Receive Data, Carrier Detect, 56K
bps, 33.6K bps, 14.4K bps, Off Hook, Terminal Ready, Error
Correction, Fax.
Speaker
Internal speaker for call progress monitoring.
Manual Control
Power switch
Environmental
Temperature range 0°–50°C (32°–120°F) ambient under
closed conditions; humidity range 20–90% (non-condensing)
Storage Temperature -10° to +85°C (14°–185°F)
Power Requirements 100–130/230VAC, 50/60 Hz, 5 W (universal power supply)
Power Consumption
9 VDC, 300 mA maximum
Dimensions
10.8 cm wide x 14.8 cm long x 2.9 cm high (4.25
" x 5.8" x
1.15
")
Weight
224 g (8 oz)
Limited Warranty
10 years
Summary of Contents for MultiModem MT5634ZBA-V-V92
