MT2834ZDX-Series Quick Start Guide
4
Step 3: Install the Modem Driver
If you use Windows 98+, you must install the modem driver,
which is installed using the Windows Plug and Play feature.
Follow the four-step procedure below. If you use another
operating system, see the User Guide.
1. Make sure your modem is connected properly, and then turn
on your computer. Windows should detect your new modem
and open the
Install New Modem
wizard.
2. Insert the system CD, and then click
OK
.
3. Windows installs and configures the modem.
4. Click
Finish
to exit.
For Windows NT, the
Install New Modem
wizard presents one
additional prompt before Step 2. At this prompt, select
Don’t
detect my modem; I will select it from a list
, and then click
Next
.
A dialog box with a list of manufacturers and a list of modem
models appears. Select your modem. Continue with Step 2
above.
Note:
If Windows cannot identify your modem (for instance, if it
identifies your modem as a “Standard Modem”), click
Change
.
A dialog box with a list of manufacturers and a list of modems
appears.
Step 4: Install Data Communications Software
Data communications software is designed to send and receive
messages. Multi-Tech includes PhoneTools communications
software with your modem. However, the modem will work with
most data communications software. To install PhoneTools,
insert the CD into the CD-ROM drive; click the PhoneTools icon.
You will be asked to choose your language. The software
automatically loads onto your PC.
