LEDS, CONNECTORS, AND SPECIFICATIONS
MultiModem
®
iCell MTCMR User Guide
33
EV-DO and CDMA Antenna Requirements
Category
Description
Frequency Range
824 - 894 MHz / 1850 - 1990 MHz
Impedance
50 Ohms
VSWR
VSWR should not exceed 2.0:1 at any point across the bands of operation
Typical Radiated Gain
2 dBi on azimuth plane
Radiation
Omni-directional
Polarization
Linear vertical
GSM/EGSM Antenna Requirements/Specifications
Category
Description
Frequency Range
824—960 MHz / 1710—1990 MHz
Impedance
50 Ohms
VSWR
VSWR should not exceed 2.0:1 at any point across the bands of operation
Typical Radiated Gain
3 dBi on azimuth plane
Radiation
Omni-directional
Polarization
Linear Vertical
Wave
Half Wave Dipole
FCC Requirements Note
FCC Requirements Note The antenna gain, including cable loss, for the radio you are incorporating into your
product design must not exceed the requirements at 850 MHz and 1900 MHz as specified by the FCC grant for
mobile operations and fixed mounted operations as defined in 2.1091 and 1.1307 of the FCC rules for satisfying RF
exposure compliance. The antenna used for transmitting must be installed to provide a separation distance of at
least 20 cm from all persons and must not transmit simultaneously with any other antenna transmitters. User and
installers must be provided with antenna installation instructions and transmitter operating conditions to satisfying
RF exposure compliance.
Global Positioning System (GPS)
This information applies only to the models with the GPS option.
Category
Description
Receiver Type
L1 Frequency
GPS C/A code
SBAS Capable
51 Channel Acquisitions
14 Channel Tracking
Sensitivity Tracking
-161dBm