Multitech MultiModem DSVD MT5600DSVD, User Manual

Page: 32 / 82

MultiModemDSVD User Guide 4 AT Commands, S-Registers, and Result Codes
27
Command: O n Return Online to Data Mode
Values: 0 or 1
Default: None
Description: O0 Exit online command mode and return to online data mode
without a retrain. Normally used after a +++ escape (see
+++AT<CR> escape sequence).
O1 Exit online command mode and return to online data mode
after a retrain.
Command: P Pulse Dialing
Values: P, T
Default: T
Description: Forces pulse (non-touch-tone) dialing until a T command or
dial modifier is received.
Command: Q n Result Codes Enable/Disable
Values: n = 0 or 1
Default: 0
Description: Q0 Enable result codes.
Q1 Disable result codes.
Command: S r Select Register
Values: r = S-register number
Default: None
Description: Selects register S r as the last register accessed. E.g., S0 . The
command
AT?
can then be used to read the register, and the
command AT= n can then be used to set the register to value n .
Command:
S
r=n Set Register Value
Values: r = S-register number; n varies
Default: None
Description: Set value of register S r to n , where n is entered in decimal for-
mat. E.g., S0=1 . If the short form AT= n is used, the value is
written to the last accessed S-register.
Command: S r? Read Register Value
Values: r = S-register number
Default: None
Description: Read value of register S r and display it in 3-digit decimal for-
mat. E.g., S2? gives the response 043 . If the short form AT? is
used, the last accessed S-register is read.
Command: T Tone Dialing
Values: P, T
Default: T
Description: Forces DTMF (touch-tone) dialing until a P command or P dial
modifier is received.
Command: V n Result Code Format
Values: n = 0 or 1
Default: 1
Description: V0 Displays result codes as digits (terse response).
V1 Displays result codes as words (verbose response).