CHAPTER 2 – INSTALLING THE MODEM
12
MultiMobile USB User Guide MT9234MU User Guide
Installing the MT9234MU in Windows Server 2008, XP, 2003
This section describes how to install the modem with a computer running Windows 2008, XP or 2003. This
section presents Windows XP illustrations. For all the operating systems noted, the installation procedure is the
same, but some illustrations may vary from those shown in this section.
Installing the Serial Port for Windows Server 2008, XP, 2003
1.
Connect the USB cable between the MultiModem and the PC.
2.
If prompted, Can Windows connect to Windows Update to search for software? Select No, not
this time. Then click Next.
3.
Click Install from a list or specific location (Advanced), and then click Next.
4.
Select only Search removable media (floppy, CD-ROM…) Include this location in the search.
5.
Click Browse and browse to the location where you stored the drivers downloaded from the
MultiTech website.
6.
Select the Windows_Drivers folder and then the WinXP32 folder. Or, if you are installing drivers
on an XP 64-bit Operating System, select the WinXP64 driver.
7.
Click Next.
