SETTING UP AND ONBOARDING DEVICES
12
MultiConnect
®
CBRS Wi-Fi AP MTCAPW-L12G2 Admin Guide
Chapter 3 – Setting Up and Onboarding Devices
Using the Setup Wizard
Note:
When using a 4G network, verify a SIM card has been installed before powering on and starting setup.
Configure the device using the web UI. To access the web UI, enter the IP Address into your browser. The default
IP Address is 192.168.2.1. If this has been changed, type in the new IP Address.
From the menu on the left, click
Wizard
.
1.
Wait 60 seconds after connecting power. The computer gets IP address 192.168.2.100 via DHCP.
2.
In a web browser, enter IP address 192.168.2.1.
3.
Login using
admin
as both the
Username
and
Password
. If you are using the default password, it will
prompt you to change it for future logins.
4.
Click
Wizard
on the left.
5.
Click
Next
.
6.
Change password
, if desired and click
Next
. (Recommended)
7.
Set the device's
Time Zone
and click
Next
.
8.
Enter and configure
APN
.
a.
Select
Manual Configuration
.
b.
Set
Country
to
Others
.
c.
Enter the
APN
provided by the SIM provider.
d.
Click
Next
.
9.
Click
Apply
.
10.
Wait a few minutes and check LED status. Power, SIM, Internet, and Signal LEDs are on when there is a
live Internet connection. For more information on the LEDs, refer to
LED Indicators
.
After the device has a valid Internet connection, your computer automatically renews to the new IP address
assigned to cellular connection and has full access to the Internet.
Using DeviceHQ for Device Management
DeviceHQ is a cloud-based device management tool for remote monitoring, upgrades, and configuration mPower
devices. For information on creating and using a DeviceHQ account, go to the
http://www.multitech.net/developer/software/devicehq/
.
Note:
If you are not using DeviceHQ
as the management system, disable DeviceHQ as the management system
within the software. Once the Setup Wizard has been completed, from the left menu select
Basic Network >
System Management
then deselect the "Enable" box on the top row of the configuration table.
System Management (DeviceHQ)
Signing Up with DeviceHQ and Setting Up MTCAPW to Communicate with DeviceHQ
1.
Register and sign up a new account at
.
2.
Log in to
and generate a device API key using the following steps:
Summary of Contents for MultiConnect MTCAPW-L12G2
