Chapter 3 – Configuration of your MultiConnect
Chapter 3 - Configuration of your
MultiConnect
The configuration of the MultiConnect varies slightly depending on which unit you are configuring, MT100A2W-G
which has the internal GPRS/GSM wireless modem. The MT100A2W requires a Multi-Tech CDMA, RS232 based
external modem for its cellular connection. The Cellular Port configuration for the MT100A2W-G has more
configuration options than the MT100A2W unit. The differences are detailed in the Cellular Port Configuration.
The following configuration procedures are based on the Windows XP Operating System. Other Windows operating
systems have similar paths to HyperTerminal. See your system’s online Help if you cannot find it.
HyperTerminal
1.
Go to
Start I All Programs I Accessories I Communications
and then
click
on
HyperTerminal
.
2.
The New Connection screen is displayed. In the
Name:
window, enter an applicable name for your
MultiConnect connection.
Click
OK
.
3.
The
Connect To
screen is displayed with the Country/region, Area code, and phone number windows
blanked out.
Multi-Tech Systems, Inc. MultiConnect AW User Guide
13
Change the
Connect using:
window to the COM port for the MultiConnect. Click on the down arrow and
select your COM port.
