ANTENNA AND ACTIVATION INFORMATION
MultiConnect
®
microCell MTCM-LAT3 and -LSP3 User Guide
17
Category
Description
Connector
SMA(M)
Device Phone Number
Every device has a unique phone number. Your service provider supplies a phone number when you activate your
account. Wireless service provider implementation may vary. Consult with your service provider to get the phone
number for your device.
Adding APN value
After properly setting up your account with your carrier and activating and installing your SIM card, you need to
add your carrier's APN (Access Point Name) into the device before the cellular modem is ready for use.
To add your APN value:
1.
Establish a terminal session with the device. If Verizon is your carrier, configure the device for the Verizon
network as described in
Dual Carrier Firmware for Cellular Radio
.
2.
If you are not on the Verizon network, program your network provider's Access Point Name (APN) into
the device. To do this, issue:
AT+CGDCONT=1,"IPV4V6","APN_Name"
(where APN_Name is the APN provided by your wireless carrier).
Your wireless carrier assigns the APN. If you don’t know the APN, contact your wireless carrier.
Your device should now be activated on the carrier’s network and ready for use. To check operation issue the
command: AT+CEREG? The modem should respond with +CEREG: 0,1 showing registration.
Sprint Activation and OMA-DM Commands (LSP3)
All applications interacting with Sprint approved MultiTech devices must be written in a manner where they do not
interfere/interrupt the Sprint Hands-Free Activation (HFA) process or OMA-DM processes.
If the MultiTech device will be co-located with any other transmitters you will be required to submit your device to
an FCC approved lab for additional testing.
If the Sprint approved MultiTech device/circuit board is embedded into another device/circuit board be aware you
must perform EMC and safety testing on your end device.
For additional information refer to:
S000729 Telit Sprint OMA-DM AT Commands
available at
www.multitech.com/documents/publications/reference-guides/S000729_Telit_Sprint_DG_OMADM-
AT_commands.pdf
For mLinux models, go to:
http://www.multitech.net/developer/software/mlinux/using-mlinux/mlinux-