CHAPTER 5 CARRIER SPECIFIC NOTICES
MultiConnect
®
Dragonfly
TM
MTQ-EV3 Device Guide
31
AT#OMADMSVPORT?
Read OMA-DM server
AT#OMADMPROXY=<port#>,<URL>
Set OMA-DM proxy server port/URL (default
http://oma.ssprov.sprint.com:80)
AT#OMADLPROXY=<port#>,<URL>
Set OMA-DL Proxy DL Server Port URL (default
http://oma.ssprov.sprint.com:80)
AT#OMADMCEN=<onoff>
Set OMA-DM Client feature; Disable=0, Enable=1
Important:
Never deploy devices with AT#OMADMCEN=0. Many
OMA commands result in error if OMADMCEN is set to 0.
AT#OMADMCEN?
Query the current OMA-DM client status
AT#OMADMCEN=?
Query OMA-DM available values
AT+OMADM=(onoff)
Set OMA-DM Client Initiated Device Configuration; Disable=0, Enable=1,
Initiate=2
AT+OMADM=?
Query OMA-DM Client Initiated Device setting
AT+PRL=<onoff>
Set OMA-DM CIPRL Session; Disable=0, Enable=1, Initiate=2
AT+PRL=?
Query OMA-DM CIPRL Session setting
AT+FUMO=
Set OMA-DM FUMO enable parameter; Disable=0, Enable=1, Initiate=2
AT+FUMO=?
Query OMA-DM FUMO parameter
AT#HFA
Initiate Sprint Hands Free Activation (HFA)
AT#HFACANCEL
Cancel Sprint Hands Free Activation (HFA) DM Session
AT$RTN=xxxxxx
HFA reset (after device reboot HFA will occur) xxxxxx= SPC or MSL.
Note:
May not work with all firmware versions.
AT#SPRTN=xxxxxx
After device reboot HFA will occur xxxxxx= SPC or MSL
AT#DCCANCEL
Cancel Device Configuration (DC) Session
AT#PRLCANCEL
Cancel Preferred Roaming List (PRL) Session
AT$PRL?
Query Preferred Roaming List (PRL) ID #
AT#FUMOCANCEL
Cancel Firmware Update Management Object (FUMO) session.
Sprint Successful Indications
Typical Successful HFA Session
Indications
Alternate Successful HFA Session
Indications
Typical Successful FUMO Session
Indications With firmware update
#900
#900
#907
#904
#904
#921
#919
#914
#921: 572 Bytes
#905
#905
#920:23
#909
#910
#920:100
#907
#900
New firmware installing
