ANTENNA AND ACTIVATION INFORMATION
MultiConnect
®
Cell MTC-G3 User Guide
19
Chapter 4 – Antenna and Activation Information
Antenna
The antenna intended for use with this unit meets the requirements for mobile operating configurations and for
fixed mounted operations, as defined in 2.1091 and 1.1307 of the FCC rules for satisfying RF exposure compliance.
If an alternate antenna is used, consult user documentation for required antenna specifications.
Antenna Information
This device was approved with the following antenna:
Manufacturer:
San Jose
Description:
Penta band antenna
Model Number:
EEN-502
Multi-Tech Part Number:
45009780L
Multi-Tech ordering information:
Model
Quantity
ANPB2-1HRA
1
ANPB2-10HRA
10
ANPB2-50HRA
50
Antenna Requirements/Specifications
Frequency range
824-960/1710-2170MHz
Impedance
50 ohm
VSWR
<2.5:1
Radiation
Omni directional
Polarization
Linear horizontal
Antenna System Cellular Devices
The cellular/wireless performance depends on the implementation and antenna design. The integration of the
antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early
so the performance is not compromised. If changes are made to the device's certified antenna system, then
recertification will be required by specific network carriers.
Account Activation for Cellular Devices
Some MultiTech devices are pre-configured to operate on a specific cellular network. To use the device, you must
set up a cellular data account with your service provider. Each service provider has its own process for adding
devices to their network.
