Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F)
45
Tools > Service Status
This screen displays the status of each service that is available at run time. The first column lists the services
available at run time; the second column identifies the configuration (enabled/disabled); the third column reports the
current status of each service.
Tools > Firmware Upgrade
Firmware Upgrade
Browse File for Upgrade:
Click the
Browse
button and select the firmware bin file. When found, highlight
the file name and press
Enter
so that the file name displays in the text box. Make sure you select the correct
BIN file; otherwise, your MTCBA-x-EN can become inoperable. Then click the
Upgrade
button.
When upgrade is completed, the program will return to the main login screen.
Important Notes:
•
Firmware Upgrade
is available only when
Firmware Upgrade Configuration
is enabled on the IP
Setup screen.
•
The new firmware is written into the flash.
•
A
Firmware Upgrade
will take at least 3 minutes while the firmware is downloaded. Do not cycle power
during this time.
•
DO NOT
perform firmware upgrade remotely via the Cellular wireless connection.
