CHAPTER 2 SPECIFICATIONS AND HARDWARE INFORMATION
MultiConnect
®
Conduit
TM
AP MTCAP User Guide for North America
9
Connectors and LEDs
Note:
Some features are available only on select models. The above image shows the model with all features.
For models that don't have a cellular radio, the chassis will not have a SIM slot.
Item
Description
Connectors
Power
5 Volt power jack.
Ethernet
RJ45 Ethernet jack.
Reset
Reset button. Reboots the device or restores factory defaults. Refer to
Resetting the Device
for details.
WPS
Reserved for future use.
SIM
Available in and -LNA3 models only. SIM slot. Refer to
Installing SIM Card
for details.
LEDs
STATUS
Blinks when operating system is fully loaded.
LORA
Lights when LoRa software is active.
CELL
Used by and -LNA3 models only. Lights when there is power to the cellular radio. Blinks
when the SIM is registered with the carrier.
WIFI
Used by -002 models only. Lights when there is a Wi-Fi connection.
Ethernet Link
Left LED on the Ethernet connector. Blinks when there is transmit and receive activity on the
Ethernet link. It shows a steady light when there is a valid Ethernet connection.
Ethernet Speed
Right LED on the Ethernet connector. Lit when the Ethernet is linked at 100 Mbps. If it is not
lit, the Ethernet is linked at 10 Mbps.
