MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 and MTC-LVW2)
MultiTech Systems
MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 and MTC-LVW2)
MultiTech Systems
MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 and MTC-LVW2)
MultiTech Systems
MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 and MTC-LVW2)
MultiTech Systems
Quick Start
Quick Start
Quick Start
Quick Start
Overview
The MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 or MTC-
LVW2) provides secure data communication between many types of
devices that use legacy and the latest communication technologies.
Regulatory Information
For additional regulatory information, see your device’s user guide or go
to your device’s page on www.multitech.com
47 CFR Part 15 Regulation Class B Devices
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
■
Consult the dealer or an experienced radio/TV technician for
help.
Warning:
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Package Contents
Your MultiConnect
®
Cell 100 Series Cellular Modem (MTC-LAT1 or MTC-
LVW2) typically includes the following (varies with model):
Power
Supply
1 - 9 VDC power supply with removable blades, 1 -
NAM blade/plug, 1 - EURO blade/plug, 1 - UK
blade/plug, 1-AU/NZ blade/plug
Cables
1 - Power cable from power supply
Antennas
2 - CELL, AUX , LTE external antennas, and 1- GPS
external antenna (for B02)
Documents
1 - Quick Start Guide, 1 - Warranty Plans, 1 -
Activation, Support & Regulatory Information
Other Items
1 - Mounting rod, 4 - Clear adhesive bumpons or
mounting feet
Device
1- MultiConnect
®
Cell 100 Series Cellular Modem
(LTE) 4.169" x 3.00" x 1.163" Blue enclosure
includes:
■
7-32 VDC power connector
■
RS-232
(DE 9-pin, female-D) connector
■
AUX
Cellular auxiliary female SMA
connector (Diversity)
■
GPS
GPS female SMA connector (for
B02)
■
CELL
cellular female SMA connector
Additional Information
For more information on your device, refer to the appropriate user guide:
http://www.multitech.com/brands/multiconnect-cell-100-series
LED Descriptions
The top panel contains the following LEDs:
■
Power and Status LEDs
- The Power LED indicates that DC
power is present and the TR LED blinks when the unit is
functioning normally.
■
Modem LEDs
- Two modem LEDs indicate carrier detection
and link status (for serial models only).
■
Signal LEDs
- Three signal LEDs display the signal strength
level of the wireless connection.
Installing a SIM Card
If you want to operate the modem on a particular cellular network, install a
mini-SIM card [or mini SIM (2FF) form factor].
To install the mini-SIM card:
1.
Locate the mini-SIM card slot on the side of the cellular
modem. The slot is labeled SIM.
2.
Push the mini-SIM card into the slot until it snaps into place.