manualshive.com logo in svg

Multitech MTASR3-200, User Manual

Share
Download
Multitech MTASR3-200 User Manual Download Page 4

Chapter 6 - Router Management

Introduction ..................................................................................................................................................... 42
Router Management ........................................................................................................................................ 43

Dial-Out ..................................................................................................................................................... 43
Router Configuration ................................................................................................................................. 43
WAN Device Configuration ....................................................................................................................... 45
Remote User Database ............................................................................................................................ 45

WEB Browser Management ............................................................................................................................ 46

Chapter 7 - Service, Warranty and Tech Support

Introduction ..................................................................................................................................................... 48
Limited Warranty ............................................................................................................................................. 48

On-line Warranty Registration ................................................................................................................... 48

Tech Support ................................................................................................................................................... 49

Recording RASFinder Information ............................................................................................................ 49

Service ............................................................................................................................................................ 50
The Multi-Tech BBS ........................................................................................................................................ 50

To log on to the Multi-Tech BBS ................................................................................................................ 50
To Download a file ..................................................................................................................................... 50

About CompuServe ......................................................................................................................................... 52
About the Internet ............................................................................................................................................ 52
About the Multi-Tech Fax-Back Service .......................................................................................... ................ 52

Appendices

Appendix A - Cabling Diagrams ....................................................................................................................... 54
Appendix B - Script Language ......................................................................................................................... 55
Appendix C - Regulatory Information .............................................................................................................. 57
Appendix D - AT Command Summary ............................................................................................................ 61

Glossary of Terms

iv

Summary of Contents for MTASR3-200



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands