HARDWARE AND SPECIFICATIONS
8
Dragonfly
™
Nano MTQN-MNG3-B01 Device Guide
2
Device has been tested up to +85° C. UL Recognized @ 85° C.
3
Radio performance may be affected by temperature extremes. This is normal.
The following table defines the remaining specifications for the MTQN-MNG3.
Category
Description
Certifications and Compliance
EMC Compliance
CE Mark, RED (EU)
Radio Compliance
CE Mark, RED (EU)
Safety Compliance
IEC 60950-1 2nd ED +Am.2
Network
GCF
Carrier
EU Carriers
Mounting Hardware
The board has two mounting holes at the corners. Use #4 or M3 hardware for mounting the Dragonfly Nano to the
board. Refer to the Mechanical Drawings for more information.
Here are some standoffs that can be used with this product.
Recommended Parts
Manufacturer
Part
Part Number
PEM (Penn Engineering &
Manufacturing)
Surface Mount Standoff
SMTSO-M3-6
RAF Electronic Hardware
6mm Hex Female Standoff
1251-3005-S-12-Zinc
Note 1:
We recommend grounding the standoffs to the main PCB for better performance.
Note 2:
For other stacking heights, refer to the Hirose DF17 Series 0.5mm Pitch Board to Board Connector Data
Sheet to select the appropriate spacers.
40-Pin Connector Definitions
The Dragonfly™ Nano offers developers an FCC and carrier certified solution that makes connecting sensors and
other edge-of-network devices quick and easy.
40-Pin Connector
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
