CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
MultiConnect
®
Cell MTC-LAT1 User Guide
29
Exit Data Mode and Close Connection
To exit data mode and close the socket:
Enter the escape sequence:
+++
To close Socket 1, enter:
AT#SH=1
The device responds with OK.
To close the data connection, enter:
AT#SGACT=1,0
The device responds with OK.
Configuring Device as UDP Client to Connect to UDP Server
Configure and Connect the Device
To configure the device as a UDP client:
1.
Check signal strength.
Enter:
AT+CSQ
2.
Verify device is registered on the cellular network.
Enter:
Should return:
+CREG: 0,1
OK
3.
Configure socket parameters
Enter:
AT#SCFG=1,1,300,240,600,50
4.
Activate context one
Enter:
AT#SGACT=1,1
5.
Create UDP connection to Server port
Enter:
AT#SD=1,1,####,"###.##.###.##"
where #### is the server port and ###.##.###.## is the IP number.
The device responds with OK, which indicates a successful connection. You can send and receive data through the
socket connection.
Exit Data Mode and Close Connection
To exit data mode and close the socket:
Enter the escape sequence:
+++
To close Socket 1, enter:
Summary of Contents for 92506964LF
Page 1: ...MultiConnect Cell MTC LAT1 User Guide...
Page 7: ...PRODUCT OVERVIEW MultiConnect Cell MTC LAT1 User Guide 7 Dimensions Serial...
Page 8: ...PRODUCT OVERVIEW 8 MultiConnect Cell MTC LAT1 User Guide Serial with GPS...
Page 9: ...PRODUCT OVERVIEW MultiConnect Cell MTC LAT1 User Guide 9 USB...
