manualshive.com logo in svg

Multistore MSM-C06, Assembly Instructions Manual, Page: 5 / 7

Share
Download
Multistore MSM-C06 Assembly Instructions Manual Download Page 5

PICTURE OF YOUR FINISHED 

STEP 5. 

   

USING THE HANDLE SCREW (NO:6) ATTACH THE HANDLE TO THE 
BACK OF THE DRAWER. FRONT INTO THE PREDRILLED HOLES ALL 
READY PROVIDED.

 

DRAWER ASSEMBLY

 

STEP 6. 

   

PLACE YOUR DRAWER RUNNER ON THE BOTTOM OF THE    
DRAWER USING THE WOOD SCREWS PROVIDED (No:4) 
SCREW TWO INTO EACH RUNNER. REPEAT FOR THE OTH-
ER SIDE

. 

STEP 3. 

 

YOUR DRAWER SHOULD BE FACING 
DOWN WITH THE FRONT DRAWER 
EXSPOSING THE CUTOUT FOR THE 
BASE TO BE PUSHED INTO FACE DOWN 
WITH THE BROWN SIDE SHOWING. MAK-
ING SURE YOU HAVE THE DRAWER 
SQUARE, PROCEED TO NAIL DOWN THE 
BASE SPACING THEM OUT AROUND THE 
EDGE OF THE THREE SIDES.                                                                   

 

PLACE YOUR RUNNERS INTO THE                   
DESIGNATED HOLES MAKING SURE THE 
WHEEL IS FACING TO THE FRONT OF THE 
GABLE.  HOLE POSITION NO 1,8 AND 15.  

YOUR DRAWER RUNNER WILL HAVE THE 
WHEEL TO THE BACK OF THE DRAWER.                                     

STEP 4  

 

Summary of Contents for MSM-C06








Reviews:

No comments