RAIL SUPPORT
BRACKETS
DOWELS
FIXED SHELF
KICK
TAKE YOUR GABLES AND LAY THEM
OUT FLAT, YOU SHOULD HAVE 2 X TOP
& 2 X BOTTOM GABLES. USING A
LITTLE WOOD GLUE (NOT SUPPLIED) IN
YOUR PRE
-
DRILLED HOLES, INSERT
YOUR WOOD DOWELS INTO 2 OF THE
HOLES AND PUSH YOUR TOP INTO
YOUR BOTTOM GABLE.
NEW STEP REQUIRES YOU TO OPEN
PART 2 AND RETIREVE THE INFILL.
ALIGN YOUR SHELVES AND KICK TO THE LEFT
-
HAND GABLE, SCREW THEM INTO
PLACE ATTACH YOU RIGHT
-
HAND GABLE AND DO THE SAME.
NEXT STEP:
YOU WILL NEED TO RETRIEVE THE INFILL FROM PART 2, USING 30mm
8 GAUGE SCREWS PROVIDED, ATTACH THE INFILL TO THE FRONT
UNDER
-
SIDE OF THE CAM SHELF BEFORE PUTTING YOUR SHELF INTO
PLACE.
FOLD OUT BOTH TOP AND BOTTOM BACKS, PROCED TO
NAIL HALF OF THE BOTTOM BACK AND HALF OF THE TOP
BACK ATTACHED THE
“
H
”
MOULD TO JOIN THE 2 BASKS
UP IN THE MIDDLEAND PROCEED TO NAIL THEM INTO
POSITION MAKING SURE YOU ARE SQUARE.
YOU WILL NEED 2 X 5/8 x 6 WOOD
SCREWS FOR THE NEXT STEP.
TAP INTO POSITION YOUR FLANGES
INTO THE HOLES PROVIDED IF YOU
WISH YOU CAN SCREW IN 1 SCREW
INTO THE MIDDLE OF THE FLANGE
AND SLIDE YOUR HANGING RAIL.
NEXT:
-
YOUR PART 2 IS REQUIRED
YOU WILL NEED THE DRAWER
ASSEMBLY SHEET ON HOW TO
CREATE YOUR DRAWER.
IN PART 2
INSERT YOUR 4 PINS (7) INTO
THE HOLE NO: (11) PROVIDED.
INSERT THE CAMS INTO THE
HOLES PROVIDED ON THE
BOTTOM OF THE SHELF.
USING SCREW DRIVER TWIST
CAM INTO LOCK POSITION.