RAIL SUPPORT
BRACKETS
DOWELS
FIXED SHELF
KICK
TAKE YOUR GABLES AND LAY THEM
OUT FLAT, YOU SHOULD HAVE 2 X TOP
& 2 X BOTTOM GABLES. USING A
LITTLE WOOD GLUE (NOT SUPPLIED) IN
YOUR PRE
-
DRILLED HOLES, INSERT
YOUR WOOD DOWELS INTO 2 OF THE
HOLES AND PUSH YOUR TOP INTO
YOUR BOTTOM GABLE.
NEW STEP REQUIRES YOU TO OPEN
PART 2 AND RETIREVE THE INFILL.
ALIGN YOUR SHELVES AND KICK TO THE LEFT
-
HAND GABLE, SCREW THEM
INTO PLACE ATTACH YOU RIGHT
-
HAND GABLE AND DO THE SAME.
NEXT STEP:
YOU WILL NEED TO RETRIEVE THE INFILL FROM PART 2, USING 30mm
8 GAUGE SCREWS PROVIDED, ATTACH THE INFILL TO THE UNDER
-
SIDE
OF THE CAM SHELF BEFORE PUTTING YOUR SHELF INTO PLACE.
FOLD OUT BOTH TOP AND BOTTOM BACKS FEED THE
“
H
”
MOULD BETWEEN THE TOP AND BOTTOM BACKS AND
PROCEED TO NAIL THEM INTO POSITION MAKING SURE
YOU ARE SQUARE.
YOU WILL NEED 2 X 5/8 x 6 WOOD
SCREWS FOR THE NEXT STEP.
TAP INTO POSITION YOUR FLANGES
INTO THE HOLES PROVIDED IF YOU
WISH YOU CAN SCREW IN 1 SCREW
INTO THE MIDDLE OF THE FLANGE
AND SLIDE YOUR HANGING RAIL.
INSERT YOUR 4 PINS (7) INTO
THE HOLE NO: (8) PROVIDED.
INSERT THE CAMS INTO THE
HOLES PROVIDED ON THE
BOTTOM OF THE SHELF.
USING SCREW DRIVER TWIST
CAM INTO LOCK POSITION.