MultiSound HP-S100, User Manual

Page: 31 / 36

HP-S100 - 100 Song
31
TRANSFER OF THE CUSTOMISED CODE FROM THE REMOTE
CONTROL TO THE APPLIANCE
If, for reasons of use, it is necessary to customise the radio con-
trol code to restore the normal functions and, therefore, make
them communicate, it is necessary to couple the two elements
again. Proceed as follows:
1. When the device is switched off, press the track changing but-
ton (UP).
2. Power on the device by keeping the (UP) key pressed. Now
the led of the player starts flashing and the device moves to
the stand by position waiting fora anew code coming from the
remote control.