15
GB
SELECT - SET - CONFIRM
All functions present on the 40-TM can be set or modified using the proce-
dure indicated on the plate located on the device:
SEL FUNCTION: SEL+SET --> SEL --> SET
SEL VALUE: +/- --> SET
1. Press the select (SEL) and set (SET) buttons at the same time for at
least 2 seconds.
2. Press the select (SEL) button to scroll the menus (see display symbols
on page 4).
3. Press the set (SET) button to enter the highlighted menu on the display.
4. Press the plus/minus (+/-) buttons to set the desired value.
5. Press the set (SET) button to confirm.
INSERT MEMORY CARD
Your 40/TM comes with a memory card already installed and ready to use.
Should you need to replace it, proceed as follows:
1. Turn off the device.
2. To remove the memory card, press inwards on the card until you hear a
click, then release the card and it will pop out on its own.
3. Insert the new memory card with the gold-colored contacts facing
downwards and press inwards until you hear a click. (see figure below)
If the memory card is not inserted correctly, the display will show this error
message, “
Sd Er
” .
To avoid damages and/or memory data loss, never remove the card while
the device is on.
